Q:How to setup ip cam to get correct image in outdoor,the video of my ipcam is all white
The ipcam support 50hz/60hz/outdoor mode
50hz/60hz is power line frequency
when use ipcam in outdoor,please select outdoor mode
Q:How to snap/record in win7/vista?
Disable IE protected mode:
Q:I can see picture on mobile pages,but video montor page is black or blank,what's the problem?
A:The OCX use a non-standard HTTP command to request video stream.Some Anti-virus software will monitor TCP 80 and block OCX to fetch video stream.
The solution is disable monitor TCP 80 on anti-virus or use another port on IPCamera device.
There is a plan to use standard protocol instead of private protocol,it can resolve this problem perfectly.
Q:Are IPcamera support Vista/Windows7?
A:Yes.IPcamera support Vista and Windows7.
In order to register OCX successful in Vista,you may need to download ocx.exe manually from the ipcamera,click right mouse and select "run as administrator".
This step is not need for Windows7.
Q:How to access the device on linux firefox?
A:The device support CGI released on 12.08.2009,you can use standard HTTP command to fetch video,control device...
We also prvide a demo,can be used in IE or firefox:demo
Just input the ip of your ipcamera,user and password,then click "start".
Q:IE crash when view video
A:Reinstall ocx released on 12.08.2009.
To avoid IE cache old OCX,after install new OCX,you had better to restart computer and retry.
A simple method is kill all iExplorer.exe on Task Manager and restart iExplorer.exe,in this way,restart computer is NOT need.
Keep your data safe before kill iExplorer.exe!
Q:How to reset the configuration?
A:the correct steps to reset config are:
1.keep the reset button down
2.power the ipcamera device on
3.keep the reset button down for about 20 seconds(less maybe works also,press 20 seconds just for assure)
then the config should be reset and the default user & password is both "admin".
Q:How to get video stream use VLC?
A:You must use TCP over RTSP,to config in VLC(take vlc version 1.0.3 for example):
open VLC main menu Tools/Perferences/Input&Codecs and check "Use RTP over RTSP(TCP)".
If the ip and port of your ipcamera is 192.168.1.123 and 80,user and password both "admin",
then you can input:
to get video stream in VLC.
Notice:video stream do NOT use the default RTSP port(554),it use the same port as HTTP,so you must always designate the port explicitly!
Q:How to config FTP
A:We have rewritten ftp module,and we sugguest upgrade to appp.bin(vs2.0) or higher version.
start from vs2.0,ftp folder is relative to the home directory of ftp server.
from vs1.1 to vs1.9,ftp folder is absolute directory on the ftp server,so you must make sure what's the home directory of ftp server.
valid folder examples:
a demo config as follows:
Q:How to config SMTP
a demo config as follows:
Q:How to config alarm(send picture by FTP and EMail when motion detect)
.config EMAIL and FTP.
.check "enable motion detect"
.check "enable email alarm"
.check "enable FTP alarm"
.select the areas by drag left mouse,drag the right mouse to cancel selected area
a demo alarm config as following picture:
Q:How to embed the camera video into my own website?
Following is a simple demo to show this usage:use_ocx
Notice:use_ocx.htm demo assume camera IP is 192.168.1.123,port is 80,user name and password both are admin.
Before test,make sure you have changed the ip+port to your camera in use_ocx.htm,and give correct user name and password.
Following picture show how it works:
The demo only show the basic function,if you need to add more funtions as in the video monitor page,you can reference videomonitor.htm
This is a html source of video monitor,you must modify it according to your requirement.
Q:How to get video/picture at my iPhone?
Please google and download Opera Mini internet browser for iPhone.
Q:How to use 4 green connectors behind the ipcamera?
there are four IO port,IO1,IO2,IO3,IO4,from left to right.
IO1 is nearby wifi antenna,IO4 is nearby power slot(DC5V).
IO1 and IO2 is input from outer alert connector
IO3 is 12v DC output negative
IO4 is 12v DC output positive
when IO1 or IO2 is signal by outer devices,ipcamera will send email(configurable) and output 12V DC on IO4.
Q:How to upgrade software and web pages?
Please download app.bin and www.bin from www.maygion.com or other ways.
Upload app.bin in "System Tools">"Update Software",click "Upgrade".
Upload www.bin in "System Tools">"Update WebPages",click "Upgrade".
Following pictures show how them look like:
Q:How to visit IPCamera on Internet?
In order to make IPCamera accessable to Internet,you must config router to forward Internet connect request to IPCamera,it also called port map.
Take an example,if the IP of your IPCamera is 192.168.1.123 and TCP port is 80.
You must tell router to forward all incoming TCP 80 connection to your IPCamera.
There are two ways to config router port map:use UPnP or Virtual Servers.
If your IPCamera use DHCP(dynamic IP),we suggest use UPnP.
If your IPCamera use static IP,we suggest use virtual severs
Notice:Please use UPnP or virtual servers,there is no need to use both UPnP and virtual server at the same time.
config port map by virtual server:just add ipcamera ip and port to router.
Following is a demo(we use TPLINK router,you can find similiar config webpage if you use other brand routers):
router config webpage:
config port map by upnp:
To use UPnP,you must first enable router's UPnP function and then,enable IPCamera's UPnP function.
Following is a demo:
router config webpage:
IPCamera config webpage:
verify router port map is working
To verify router port map is working,you can find router's WAN IP and visit it to access IPCamera.
Take an example,if your router's WAN IP is 184.108.40.206 and IPCamera use TCP 80,then you can visit IPCamera by http://220.127.116.11
If you use other port,for example,TCP 81,you must visit by http://18.104.22.168:81
Find router WAN IP:
Visit IPCamera by WAN IP:
If your have two or more IPCameras in the same router,you must give each IPCamera a different TCP port to make them accessable on Internet.
If the WAN IP of your router is change from time to time,you can give a DDNS to your IPCamera,and then visit IPCamera by DDNS.
Q:How to config DDNS?
If you want to visit IPCamera on Internet and you have no static WAN IP,then DDNS is for you!
DDNS is bind your router WAN IP to a domain name,so you no need to provide IP to visit IPCamera.
For English-speaking user,we suggest use DDNS provided by www.dyndns.org
For Chinese user,we suggest use DDNS provided by www.3322.org
After get your DDNS account information,fill them on the IPCamera webpage.
Following is a demo:
Then,you can enter "http://www.xwpcom.dyndns.org:81" to visit IPCamera(change xwpcom.dyndns.org to your DDNS).
If your port is 80,there is no need to append port,just use "http://www.xwpcom.dyndns.org".